Table 53: Default Interface Configuration For The Services Gateway - Juniper SRX550 Hardware Manual

Copyright © 2016, Juniper Networks, Inc.

Table 53: Default Interface Configuration for the Services Gateway

Port Label Interface
0/0 ge-0/0/0
NOTE: If
chassis
clustering is
enabled, use
this port as
the
management
port ( ).
fxp0
ge-0/0/1 (if
0/1
used)
NOTE: If
chassis
clustering is
enabled, use
this port as
the control
port ( ).
fxp1
ge-0/0/2 (if
0/2
used)
NOTE: Use
this port as a
fabric port.
ge-0/0/3 (if
0/3
used)
NOTE: Use
this port as a
fabric port.
Chapter 18: Performing Initial Configuration
Security DHCP
Connector Zone State
RJ-45 Untrust Client
RJ-45 Trust Server
RJ-45 Trust Server
RJ-45 Trust Server
Address
Dynamically assigned
192.168.1.1/24
192.168.2.1/24
192.168.3.1/24
125