Connector Pinouts For The Srx550 High Memory Services Gateway Console Port; Console Port; Table 35: Rj-45 Connector Pinouts For The Services Gateway Console Port - Juniper SRX550 Hardware Manual

Related
Documentation
RJ-45 Connector Pinouts for the SRX550 High Memory Services Gateway Console
Port
Related
Documentation
Copyright © 2016, Juniper Networks, Inc.
Table 34: RJ-45 Connector Pinouts for Services Gateway Ethernet
Port (continued)
Pin
7
8
RJ-45 Connector Pinouts for the SRX550 High Memory Services Gateway Console
Port on page 71
Interface Cabling and Wiring Specifications for the SRX550 High Memory Services
Gateway on page 69
The port on the front panel labeled CONSOLE is an autosensing 10/100-Mbps Ethernet
RJ-45 receptacle that accepts an RJ-45 cable for connecting the services gateway to a
management LAN (or other device that supports out-of-band management).
Table 35 on page 71 describes the RJ-45 connector pinouts for the console port.
Table 35: RJ-45 Connector Pinouts for the Services Gateway Console
Port
Pin
1
2
3
4
5
6
7
8
RJ-45 Connector Pinouts for the SRX550 High Memory Services Gateway Ethernet
Port on page 70
Interface Cabling and Wiring Specifications for the SRX550 High Memory Services
Gateway on page 69
Chapter 10: Cable Specifications and Pinouts
Signal
Termination network
Termination network
Signal
RTS
DTR
TXD
Ground
Ground
RXD
DSR/DCD
CTS
Description
Request to Send
Data Terminal Ready
Transmit Data
Signal Ground
Signal Ground
Receive Data
Data Set Ready
Clear to Send
71