Unpacking The Srx550 High Memory Services Gateway; Services Gateway" On Page - Juniper SRX550 Hardware Manual

CHAPTER 12
Unpacking the SRX550 High Memory
Services Gateway

Unpacking the SRX550 High Memory Services Gateway

Copyright © 2016, Juniper Networks, Inc.
Unpacking the SRX550 High Memory Services Gateway on page 91
Verifying Parts Received with the SRX550 High Memory Services Gateway on page 92
Ensure that you have the following parts and tools available:
Phillips (+) screwdriver, number 2
Blank panels to cover any slots not occupied by a component
The SRX550 High Memory Services Gateway is shipped in a cardboard carton and secured
with foam packing material. The carton also contains an accessory box and quick start
instructions.
NOTE: The services gateway is maximally protected inside the cardboard
carton. Do not unpack it until you are ready to begin installation.
To unpack the SRX550 High Memory Services Gateway:
Move the cardboard carton to a staging area as close to the installation site as possible,
1.
where you have enough room to remove the components from the chassis.
Position the cardboard carton with the arrows pointing up.
2.
Carefully open the top of the cardboard carton.
3.
Remove the foam covering the top of the services gateway.
4.
Remove the accessory box.
5.
Verify the parts received against the lists in
6.
High Memory Services Gateway" on page
Store the brackets and bolts inside the accessory box.
7.
Save the shipping carton and packing materials in case you need to move or ship the
8.
services gateway at a later time.
"Verifying Parts Received with the SRX550
92.
91