Srx550 High Memory Services Gateway Autoinstallation Overview - Juniper SRX550 Hardware Manual

SRX550 High Memory Services Gateway Autoinstallation Overview

Related
Documentation
Copyright © 2016, Juniper Networks, Inc.
SRX550 High Memory Services Gateway Fire Safety Requirements and Fire Suppression
Equipment on page 195
Autoinstallation provides automatic configuration for a new SRX550 High Memory
Services Gateway that you connect to the network and turn on, or for a services gateway
configured for autoinstallation. The autoinstallation process begins whenever a services
gateway is powered on and cannot locate a valid configuration file in the CompactFlash.
Typically, a configuration file is unavailable when a services gateway is powered on for
the first time or if the configuration file is deleted from the CompactFlash. The
autoinstallation feature enables you to deploy multiple services gateways from a central
location in the network.
If you are setting up many services gateways, autoinstallation can help automate the
configuration process by loading configuration files onto new or existing devices
automatically over the network. You can use the CLI to configure a services gateway for
autoinstallation. The J-Web interface does not include pages for the autoinstallation
feature.
For the autoinstallation feature to work, you must store one or more host-specific or
default configuration files on a configuration server in the network and have a service
available—typically Dynamic Host Configuration Protocol (DHCP)—to assign an IP address
to the services gateway.
Autoinstallation begins automatically when you connect to the Ethernet port labeled
(interface ge-0/0/0) on a new services gateway connected to the network and
0/0
power on the services gateway. To simplify the process, you can explicitly enable
autoinstallation on a services gateway and specify a configuration server, an
autoinstallation interface, and a protocol for IP address acquisition.
NOTE: Autoinstallation is enabled on all ports of the services gateway. If you
do not want to use the autoinstallation feature, you must delete it using the
CLI. For more information about the autoinstallation feature, see the
Installation and Upgrade Guide for Security Devices
Installation Overview for the SRX550 High Memory Services Gateway on page 87
Required Tools and Parts for Installing the SRX550 High Memory Services Gateway
on page 88
Grounding the SRX550 High Memory Services Gateway on page 106
SRX550 High Memory Services Gateway Basic Connectivity Overview on page 123
Chapter 11: Installation Overview
.
89