Built-In Ethernet Ports For The Srx550 High Memory Services Gateway; Table 52: Services Gateway Prerequisite Tasks - Juniper SRX550 Hardware Manual

SRX550 High Memory Services Gateway Hardware Guide
Related
Documentation

Built-In Ethernet Ports for the SRX550 High Memory Services Gateway

124

Table 52: Services Gateway Prerequisite Tasks

Task
Gather information on:
If you are performing the initial configuration
with the CLI, gather the following equipment:
SRX550 High Memory Services Gateway Basic Connectivity Overview on page 123
Configuring the SRX550 High Memory Services Gateway Using J-Web on page 129
Connecting to the SRX550 High Memory Services Gateway from the CLI Locally on
page 131
Connecting to the SRX550 High Memory Services Gateway from the CLI Remotely on
page 133
Before initial configuration, when the factory default configuration is active, the services
gateway attempts to perform autoinstallation by obtaining a device configuration through
all its connected interfaces, including the interface ge-0/0/0. All interfaces are configured
as Layer 3 interfaces. See Table 53 on page 125
Details
Device name
Password for the root user
Time zone information
System time and zone for services
gateway location
IP address of a Network Time Protocol
(NTP) server, if NTP is used to set the time
on the services gateway
Management device, such as a desktop or
laptop computer, with a serial port and an
asynchronous terminal application (such as
Microsoft Windows HyperTerminal)
Serial cable
For a remote connection, gather the following
equipment:
Two dial-up modems
An adapter appropriate for your modem;
for example, DB-25 male or similar
for the default interface configuration.
Copyright © 2016, Juniper Networks, Inc.