Cable Specifications And Pinouts; Interface Cabling And Wiring Specifications For The Srx550 High Memory Services Gateway - Juniper SRX550 Hardware Manual

CHAPTER 10

Cable Specifications and Pinouts

Interface Cabling and Wiring Specifications for the SRX550 High Memory Services
Gateway
Copyright © 2016, Juniper Networks, Inc.
Interface Cabling and Wiring Specifications for the SRX550 High Memory Services
Gateway on page 69
RJ-45 Connector Pinouts for the SRX550 High Memory Services Gateway Ethernet
Port on page 70
RJ-45 Connector Pinouts for the SRX550 High Memory Services Gateway Console
Port on page 71
EIA-530A DCE Cable Pinouts for the 1-Port Serial Mini-Physical Interface
Module on page 72
EIA-530A DTE Cable Pinouts for the 1-Port Serial Mini-Physical Interface
Module on page 73
RS-232 DCE Cable Pinouts for the 1-Port Serial Mini-Physical Interface
Module on page 74
RS-232 DTE Cable Pinouts for the 1-Port Serial Mini-Physical Interface
Module on page 75
RS-422/449 (EIA-449) DCE Cable Pinouts for the 1-Port Serial Mini-Physical Interface
Module on page 76
RS-422/449 (EIA-449) DTE Cable Pinouts for the 1-Port Serial Mini-Physical Interface
Module on page 78
V.35 DCE Cable Pinouts for the 1-Port Serial Mini-Physical Interface Module on page 80
V.35 DTE Cable Pinouts for the 1-Port Serial Mini-Physical Interface Module on page 81
X.21 DCE Cable Pinouts for the 1-Port Serial Mini-Physical Interface Module on page 82
X.21 DTE Cable Pinouts for the 1-Port Serial Mini-Physical Interface Module on page 83
The network interfaces supported on the services gateway accept different kinds of
network cables. Table 33 on page 70
to ports on the services gateway.
lists the specifications for the cables that connect
69