Enable Ipif_Ipv6_Link_Local_Auto - D-Link DGS-3200 SERIES Cli Manual

D G S - 3 2 0 0 - 1 0 : 4 # s h o w i p i f
C o m m a n d : s h o w i p i f
I P I n t e r f a c e S e t t i n g s
I P I n t e r f a c e
I P A d d r e s s
S u b n e t M a s k
V L A N N a m e
I n t e r f a c e A d m i n . S t a t e
L i n k S t a t u s
M e m b e r P o r t s
T o t a l E n t r i e s : 1
D G S - 3 2 0 0 - 1 0 : 4 #
27-7 enable
Purpose
Enable the auto configuration of link local address when no IPv6 address is configured.
Format
enable ipif_ipv6_link_local_auto [<ipif_name 12> | all ]
Description
Enable the auto configuration of link local address when there are no IPv6 addresses explicitly configured.
When an IPv6 address is explicitly configured, the link local address will be automatically configured, and
the IPv6 processing will be started. When there is no IPv6 address explicitly configured, by default, link
local address is not configured and the IPv6 processing will be disabled. By enabling this automatic
configuration, the link local address will be automatically configured and IPv6 processing will be started.
Parameters
Parameters
ipif_name
all
DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
: S y s t e m
: 1 0 . 9 0 . 9 0 . 9 0
: 2 5 5 . 0 . 0 . 0
: v 1
: E n a b l e d
: L i n k U P
: 1 - 1 0
ipif_ipv6_link_local_auto
Description
The name of the interface.
All the IP interfaces.
( M A N U A L )
214