Disable Pvid Auto_Assign; Show Pvid Auto_Assign - D-Link DGS-3200 SERIES Cli Manual

20-12 disable pvid auto_assign

Purpose
Disable auto assignment of PVID.
Format
disable pvid auto_assign
Description
The command disables the auto-assignment of PVID. If "auto-assign PVID" is disabled, PVID can only be
changed by PVID configuration (user changes explicitly). The VLAN configuration will not automatically
change PVID.
If "Auto-assign PVID" is enabled, PVID can be changed by PVID or VLAN configuration. When a user
configures a port to VLAN X's untagged membership, this port's PVID will be updated with VLAN X. In the
form of VLAN list command, PVID is updated with the last item of the VLAN list. When a user removes a
port from the untagged membership of the PVID's VLAN, the port's PVID will be assigned with "default
VLAN".
The default setting is enabled.
Parameters
None.
Restrictions
You must have administrator privileges.
Example
To disable the auto-assign PVID:
D G S - 3 2 0 0 - 1 0 : : 4 # d i s a b l e p v i d a u t o _ a s s i g n
C o m m a n d : d i s a b l e p v i d a u t o _ a s s i g n
S u c c e s s .
D G S - 3 2 0 0 - 1 0 : : 4 #

20-13 show pvid auto_assign

Purpose
Display the PVID auto-assigment state.
Format
show pvid auto_assign
DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
184