Show Traffic Control - D-Link DGS-3200 SERIES Cli Manual

storm events are detected by a SW traffic storm control mechanism.
Note: A traffic control trap is active only when the control action is configured as "shutdown". If the
control action is "drop" there will no traps issue while storm event is detected.
Parameters
Parameters
none
storm_occurred
storm_cleared
both
Restrictions
You must have administrator privileges.
Examples
D G S - 3 2 0 0 - 1 0 : 4 # c o n f i g t r a f f i c t r a p b o t h
C o m m a n d : c o n f i g t r a f f i c t r a p b o t h
S u c c e s s .
D G S - 3 2 0 0 - 1 0 : 4 #

47-3 show traffic control

Purpose
Used to display current traffic control settings.
Format
show traffic control{ <portlist> }
Description
The show traffic control command displays current traffic control settings.
Parameters
Parameters
portlist
DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
Description
No notification will be generated when storm event is detected or
cleared.
A notification will be generated when a storm event is detected.
A notification will be generated when a storm event is cleared.
A notification will be generated both when a storm event is detected
and cleared.
Description
Used to specify a range of ports to be shown. If no parameter is specified,
the system will display all port packet storm control configurations.
434