Buzzer Sound Disable/Enable; Auto-Scan Function - D-Link KVM-440 User Manual

Note: With 3 cascading layers, you can select the last layer directly;
Example: Press <Scroll Lock> twice, then D2D5D7, and <Enter>:
D2 : layer 1 - channel 2 links to
D5 : layer 2 - channel 5 links to
D7 : layer 3 - channel 7 selected
Note: You can also select active channels in the cascade chain from within the
OSD menu. Move the indicator bar to the channel you wish to switch to
using the <Arrow Keys>, <Page Up> or <Page Down>, and then press
<Enter> to switch to the target port. Please refer to section 7.2.2
Channel select to cascade port.

6.5. Buzzer Sound Disable/Enable

By default, the buzzer sound is turned on. You may enable/disable this feature by
pressing <Scroll Lock> twice, then <B> and <Enter>.
<Scroll Lock> → <Scroll Lock> → <B> → <Enter>
Note: You can also enable/disable the buzzer sound by pressing <F1> in the
OSD main menu. Please refer to section 7.3.6 Setup in OSD - Sound.

6.6. Auto-Scan Function

To enable the Auto-Scan function, press <Scroll Lock> twice, then <S> and
<Enter>. The KVM switch will automatically start shifting through all the ports
and display them on the monitor. The default banner display time is 5 seconds.
This can be changed to 10 seconds, 15 seconds or always on (∞).
The mouse and keyboard will be inactive while in auto-scan mode. This is
Figure 13: Buzzer setup hotkey
17
.