Show Scheduling - D-Link DGS-3200 SERIES Cli Manual

Restrictions
You must have administrator privileges.
Examples
To configure the traffic scheduling mechanism for each COS queue:
D G S - 3 2 0 0 - 1 0 : 4 # c o n f i g s c h e d u l i n g _ m e c h a n i s m s t r i c t
C o m m a n d : c o n f i g s c h e d u l i n g _ m e c h a n i s m s t r i c t
S u c c e s s .
D G S - 3 2 0 0 - 1 0 : 4 #

43-5 show scheduling

Purpose
Used to display the current traffic scheduling parameters in use on the switch.
Format
show scheduling
Description
The show scheduling command displays the current traffic scheduling parameters in use on the switch.
Parameters
None.
Restrictions
None.
Examples
To display traffic scheduling parameters for each COS queue (for example, four hardware priority queues):
D G S - 3 2 0 0 - 1 0 : 4 # s h o w s c h e d u l i n g
C o m m a n d : s h o w s c h e d u l i n g
Q O S O u t p u t S c h e d u l i n g
C l a s s I D M A X . P a c k e t s
- - - - - - - - - - - - - - - - - - - -
C l a s s - 0 1
C l a s s - 1 2
C l a s s - 2 3
C l a s s - 3 4
DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
384