Enable Admin - D-Link DGS-3200 SERIES Cli Manual

Parameters
None.
Restrictions
None.
Examples
To display the parameters of authentication:
D G S - 3 2 0 0 - 1 0 : 4 # s h o w a u t h e n p a r a m e t e r
C o m m a n d : s h o w a u t h e n p a r a m e t e r
R e s p o n s e t i m e o u t : 6 0 s e c o n d s
U s e r a t t e m p t s
D G S - 3 2 0 0 - 1 0 : 4 #

36-25 enable admin

Purpose
Used to open the administrator level privilege
Format
enable admin
Description
Promote the "user" privilege level to "admin" level. When the user enters this command, the authentication
method TACACS, XTACAS, TACACS+, user-defined server groups, local enable, or none will be used to
authenticate the user. Because TACACS, XTACACS and RADIUS don't support the "enable" function by
themselves, if a user wants to use either one of these three protocols to enable authentication, the user
must create a special account on the server host first, which has a username "enable" and then configure
its password as the enable password to support the "enable" function.This command can not be used
when authentication policy is disabled.
Parameters
None.
Restrictions
You must have administrator privilege.
DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
: 9
314