Config Router_Ports_Forbidden - D-Link DGS-3200 SERIES Cli Manual

D G S - 3 2 0 0 - 1 0 : 4 # c o n f i g r o u t e r _ p o r t s d e f a u l t a d d 1 - 1 0
C o m m a n d : c o n f i g r o u t e r _ p o r t s d e f a u l t a d d 1 - 1 0
S u c c e s s .
D G S - 3 2 0 0 - 1 0 : 4 #

32-4 config router_ports_forbidden

Purpose
Used to configure ports as forbidden router ports.
Format
config router_ports_forbidden <vlan_name 32> [add|delete] <portlist>
Description
The config router_ports_forbidden command allows you to designate a range of ports as being not
connected to multicast-enabled routers. This ensures that the forbidden router port will not propagate
routing packets out.
Parameters
Parameters
vlan_name
add | delete
portlist
Restrictions
You must have administrator privileges.
Examples
To set up port range 1-7 to be forbidden router ports of the default VLAN:
D G S - 3 2 0 0 - 1 0 : 4 # c o n f i g router_ports_forbidden d e f a u l t a d d 1 - 7
C o m m a n d : c o n f i g router_ports_forbidden d e f a u l t a d d 1 - 7
S u c c e s s .
D G S - 3 2 0 0 - 1 0 : 4 #
DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
Description
The name of the VLAN on which the router port resides.
Specifies to add or delete the router ports.
Specifies a range of ports to be configured.
240