Response Messages - D-Link DGS-3200 SERIES Cli Manual

Description
Users may enter this command to modify the command prompt.
The current command prompt consists of four parts: "product name" + ":" + "user level" + "#" (e.g.
"DGS-3200-10:4#"). This command is used to modify the first part (1. "product name") with a string
consisting of a maximum of 16 characters, or to be replaced with the users' login user name.
Parameters
Parameters
string
username
default
Restrictions
1. When users issue the "reset" command, the current command prompt will remain in tact. Yet, issuing the
"reset system" will return the command prompt to its original factory default value.
2. You must have administrator privileges.
Example
To edit the command prompt:
D G S - 3 2 0 0 - 1 0 : 4 # c o n f i g c o m m a n d _ p r o m p t D G S - 3 2 0 0 - 1 0
C o m m a n d : c o n f i g c o m m a n d _ p r o m p t D G S - 3 2 0 0 - 1 0
S u c c e s s .
D G S - 3 2 0 0 - 1 0 : 4 #

Response messages

(1). "Success."
(2). "Fail ! The entered prompt string exceeded the maximum length (16)."
When the prompt string entered exceeds the maximum characters allowed (16).
DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
Description
Enter the new command prompt string of no more than 16 characters.
Enter this command to set the login username as the command prompt.
Enter this command to return the command prompt to its original factory
default value.
115