Enable/Disable Jwac Redirect - D-Link DGS-3200 SERIES Cli Manual

disable jwac
Description
JWAC and WAC are mutually exclusive functions. That is, they can not be enabled at the same time.
Using the JWAC function, PC users need to pass two stages of authentication. The first stage is to do the
authentication with the quarantine server and the second stage is the authentication with the switch. For the
second stage, the authentication is similar to WAC, except that there is no port VLAN membership change
by JWAC after a host passes authentication. The RADIUS server will share the server configuration defined
by the 802.1X command set.
Parameters
None.
Restrictions
You must have administrator privileges.
Example
D G S - 3 2 0 0 - 1 0 : 4 # e n a b l e j w a c
C o m m a n d : e n a b l e j w a c
S u c c e s s .
D G S - 3 2 0 0 - 1 0 : 4 #

42-2 enable/disable jwac redirect

Purpose
Used to enable or disable JWAC redirect function.
Format
enable jwac redirect
disable jwac redirect
Description
When redirect quarantine_server is enabled, the unauthenticated host will be redirected to a quarantine
server when it tries to access a random URL. When redirect jwac_login_page is enabled, the
unauthenticated host will be redirected to the jwac_login_page on the Switch to finish authentication.
When redirect is disabled, only access to quarantine_server and the jwac_login_page from an
unauthenticated host is allowed, all other Web access will be denied.
DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
361