802.1X Command List - D-Link DGS-3200 SERIES Cli Manual

35 802.1X Command List

enable 802.1x
disable 802.1x
create 802.1x user <username 15>
delete 802.1x user <username 15>
show 802.1x user
config 802.1x auth_protocol [local|radius_eap]
show 802.1x [auth_state | auth_configuration] {ports <portlist>}
config 802.1x capability ports [<auth_portlist>|all] [authenticator|none]
config 802.1x auth_parameter ports [<auth_portlist>|all] [default| {direction [both|in] | port_control
[force_unauth|auto|force_auth] |quiet_period <sec 0-65535> |tx_period <sec 1-65535> |
supp_timeout <sec 1-65535> | server_timeout <sec 1-65535> |max_req <value 1-10> | reauth_period
<sec 1-65535> | enable_reauth [enable|disable]}]
config 802.1x auth_mode [port_based |mac_based]
config 802.1x init [port_based ports [<auth_portlist|all>] |mac_based ports [<portlist>|all]
{mac_address <macaddr>}]
config 802.1x reauth [port_based ports [<auth_portlist|all>] |mac_based ports [<auth_portlist>|all]
{mac_address <macaddr>}]
create 802.1x guest_vlan {<vlan_name 32>}
delete 802.1x guest_vlan {<vlan_name 32>}
config 802.1x guest_vlan ports [<auth_portlist>|all] state [enable | disable]
show 802.1x guest_vlan
config radius add <server_index 1-3> [<server_ip> | <ipv6addr> ] key <passwd 32> [ default |
{ auth_port<udp_port_number 1-65535> | acct_port <udp_port_number 1-65535> | timeout
<int 1-255> | retransmit <int 1-255>} ]
config radius delete <server_index 1-3>
config radius <server_index 1-3> {ipaddress [<server_ip> | <ipv6addr> ] |key <passwd 32> |
auth_port
<udp_port_number> | acct_port <udp_port_number> | timeout <int 1-255> | retransmit
<int 1-255>}
show radius
show auth_statistics {ports <auth_portlist>}
show auth_diagnostics {ports <auth_portlist>}
show auth_session_statistics {ports <auth_portlist>}
DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
265