Enable Snmp Authenticate_Traps; Disable Snmp Authenticate_Traps - D-Link DGS-3200 SERIES Cli Manual

Example
To prevent SNMP traps from being sent from the switch:
D G S - 3 2 0 0 - 1 0 : 4 # d i s a b l e s n m p t r a p s
C o m m a n d : d i s a b l e s n m p t r a p s
S u c c e s s .
D G S - 3 2 0 0 - 1 0 : 4 #

7-12 enable snmp authenticate_traps

Purpose
Used to enable SNMP authentication failure trap support.
Format
enable snmp authenticate_traps
Description
The enable snmp authenticate_traps command enables SNMP authentication failure trap support.
Parameters
None.
Restrictions
You must have administrator privileges.
Example
To enable SNMP authentication trap support:
D G S - 3 2 0 0 - 1 0 : 4 # e n a b l e s n m p a u t h e n t i c a t e _ t r a p s
C o m m a n d : e n a b l e s n m p a u t h e n t i c a t e _ t r a p s
S u c c e s s .
D G S - 3 2 0 0 - 1 0 : 4 #

7-13 disable snmp authenticate_traps

Purpose
Used to disable SNMP authentication failure trap support.
DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
90