Show Ipv6Route; Enable Ipif_Ipv6_Link_Local_Auto System - D-Link DGS-1100-06/ME Cli Reference Manual

DGS-1100-06/ME:5#delete ipv6route default
Command: delete ipv6route default
Success.
DGS-1100-06/ME:5#

show ipv6route

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show IPv6 route:
DGS-1100-06/ME:5# show ipv6route
Command: show ipv6route
IPv6 Prefix: ::/0
Next Hop : 2000::1
Total Entries: 1
DGS-1100-06/ME:5#

enable ipif_ipv6_link_local_auto System

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable the IP interface IPv6 link-local settings on the switch:
DGS-1100-06/ME Metro Ethernet Managed Switch CLI Reference Guide
Used to display IPv6 routes.
show ipv6route
This show ipv6route command displays the IPv6 routes.
None.
None.
Used to enable the autoconfiguration of the link local address when
no IPv6 address is configured.
enable ipif_ipv6_link_local_auto System
This enable ipif_ipv6_link_local_auto System command will
automatically create an IPv6 link local address for the Switch if no
IPv6 address has previously been configured.
None.
Only Administrator or operator-level users can issue this command.
Protocol: Static Metric: 1
IPIF : System
205