Config 802.1X Auth_Mode; Config 802.1X Init - D-Link DGS-3200 SERIES Cli Manual

Examples
To configure the parameters that control the operation of the authenticator associated with a port:
D G S - 3 2 0 0 - 1 0 : 4 # c o n f i g 8 0 2 . 1 x a u t h _ p a r a m e t e r p o r t s 1 : 1 - 1 : 2 0 d i r e c t i o n b o t h
C o m m a n d : c o n f i g 8 0 2 . 1 x a u t h _ p a r a m e t e r p o r t s 1 : 1 - 1 : 2 0 d i r e c t i o n b o t h
S u c c e s s .
D G S - 3 2 0 0 - 1 0 : 4 #

35-10 config 802.1x auth_mode

Purpose
Used to configure 802.1x authentication mode.
Format
config 802.1x auth_mode [port_based |mac_based]
Description
The config 802.1x auth_mode command configures the authentication mode.
Parameters
Parameters
port_based
mac_based
Restrictions
You must have administrator privileges.
Examples
To configure the authentication mode.:
D G S - 3 2 0 0 - 1 0 : 4 # c o n f i g 8 0 2 . 1 x a u t h _ m o d e p o r t _ b a s e d
C o m m a n d : c o n f i g 8 0 2 . 1 x a u t h _ m o d e p o r t _ b a s e d
S u c c e s s .
D G S - 3 2 0 0 - 1 0 : 4 #

35-11 config 802.1x init

Purpose
Used to initialize the authentication state machine of some or all ports.
DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
Description
Configure the authentication as port-based mode.
Configure the authentication as MAC-based mode.
274