Config Authen Parameter Response_Timeout - D-Link DGS-3200 SERIES Cli Manual

D G S - 3 2 0 0 - 1 0 : 4 # s h o w a u t h e n s e r v e r _ h o s t
C o m m a n d : s h o w a u t h e n s e r v e r _ h o s t
S R V I P A d d r e s s
- - - - - - - - - - - - - - -
1 0 . 1 . 1 . 2 2 2
T o t a l E n t r i e s : 1
D G S - 3 2 0 0 - 1 0 : 4 #

36-22 config authen parameter response_timeout

Purpose
Used to configure the amount of time waiting or for user input on console, Telnet, and SSH applications.
Format
config authen parameter response_timeout <int 0-255>
Description
Configure the amount of time waiting or for user input on console, Telnet, and SSH applications.
Parameters
Parameters
<int 0-255>
Restrictions
You must have administrator privilege.
Examples
To configure the amount of time waiting or for user input to be 60 seconds:
D G S - 3 2 0 0 - 1 0 : 4 # c o n f i g a u t h e n p a r a m e t e r r e s p o n s e _ t i m e o u t 6 0
C o m m a n d : c o n f i g a u t h e n p a r a m e t e r r e s p o n s e _ t i m e o u t 6 0
S u c c e s s .
D G S - 3 2 0 0 - 1 0 : 4 #
DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
P r o t o c o l P o r t
- - - - - - - - - - - - -
T A C A C S + 1 5 5 5 5
Description
The amount of time for user input on console or Telnet or SSH.
0 means there is no time out. The default value is 30 seconds.
T i m e o u t R e t r a n s m i t
- - - - - - - - - - - - - - - - -
1 0 N o U s e
312
K e y
- - - - - - - - - - - - - - - - - - - - - - - - -
T h i s i s a s e c r e t