O S Command List; Config Bandwidth_Control - D-Link DGS-3200 SERIES Cli Manual

43 QoS Command List
config bandwidth_control <portlist>{rx_rate [ no_limit | <value 512-1024000>] |
tx_rate [ no_limit | <value 512-1024000>]}
show bandwidth_control {<portlist>}
config scheduling <class_id 0-7> max_packet<value 0-255>
config scheduling_mechanism [strict(1) | weight_fair(2)]
show scheduling
show scheduling_mechanism
config 802.1p user_priority <priority 0-7> <class_id 0-7>
show 802.p user_priority
config 802.1p default_priority [ <portlist> | all ] <priority 0-7>
show 802.1p default_priority { <portlist>}

43-1 config bandwidth_control

Purpose
Used to configure the port bandwidth limit control.
Format
config bandwidth_control <portlist>{rx_rate [ no_limit | <value 512-1024000>] | tx_rate [ no_limit |
<value 512-1024000>]}
Description
The config bandwidth_control command sets the maximum limit for port bandwidth.
Parameters
Parameters
portlist
rx_rate
DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
Description
Specifes a range of ports to be configured.
Specifies the limitation of receive data rate.
379