Show 802.1P User_Priority; Config 802.1P Default_Priority - D-Link DGS-3200 SERIES Cli Manual

43-8 show 802.1p user_priority

Purpose
Used to display 802.1p user priority.
Format
show 802.1p user_priority
Description
The show 802.1p user_priority command displays 802.1p user priority.
Parameters
None.
Restrictions
None.
Examples
To display the traffic scheduling mechanism for each COS queue:
D G S - 3 2 0 0 - 1 0 : 4 # s h o w 8 0 2 . 1 p u s e r _ p r i o r i t y
C o m m a n d : s h o w 8 0 2 . 1 p u s e r _ p r i o r i t y
Q O S C l a s s o f T r a f f i c
P r i o r i t y - 0 - >
P r i o r i t y - 1 - >
P r i o r i t y - 2 - >
P r i o r i t y - 3 - >
P r i o r i t y - 4 - >
P r i o r i t y - 5 - >
P r i o r i t y - 6 - >
P r i o r i t y - 7 - >
D G S - 3 2 0 0 - 1 0 : 4 #

43-9 config 802.1p default_priority

Purpose
Used to configure the 802.1p default priority settings on the switch. If an untagged packet is received by
the switch, the priority configured with this command will be written to the packet's priority field.
DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
< C l a s s - 1 >
< C l a s s - 3 >
< C l a s s - 0 >
< C l a s s - 1 >
< C l a s s - 2 >
< C l a s s - 2 >
< C l a s s - 3 >
< C l a s s - 3 >
387