D-Link DGS-3200 SERIES Cli Manual page 413

flag_mask [ al | {urg | ack | psh| rst| syn | fin}] } |
udp {src_port_mask <hex 0x0-0xffff> | dst_port_mask <hex 0x0-0xffff>} |
protocol_id_mask <hex 0x0-0xff> {user_define_mask <hex 0x0-0xffffffff>}]}
| packet_content_mask
{offset_chunk_1 <value 0-31> <hex 0x0-0xffffffff>
offset_chunk_2 <value 0-31> <hex 0x0-0xffffffff>
offset_chunk_3 <value 0-31> <hex 0x0-0xffffffff>
offset_chunk_4 <value 0-31> <hex 0x0-0xffffffff>} | ipv6
{class | flowlabel | source_ipv6_mask<ipv6mask> | destination_ipv6_mask <ipv6mask>} ]
Description
The create access_profile command creates access list rules.
Note: Please see the Appendix section entitled "Mitigating ARP Spoofing Attacks Using Packet Content
ACL" for a configuration example and further information.
Parameters
Parameters
vlan
source_mac
destination_mac
802.1p
ethernet_type
vlan
source_ip_mask
destination_ip_mask
dscp
icmp
igmp
tcp
udp
protocod_id_mask
DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
Description
Specifies a VLAN mask.
Specifies the source MAC mask.
Specifies the destination MAC mask.
Specifies 802.1p priority tag mask.
Specifies the Ethernet type mask.
Specifies a VLAN mask.
Specifies an IP source submask.
Specifies an IP destination submask.
Specifies the DSCP mask.
Specifies that the rule applies to icmp traffic.
type
code
Specifies that the rule applies to IGMP traffic.
type
Specifies that the rule applies to TCP traffic.
src_port_mask
dst_port_mask
flag_mask
Specifies that the rule applies to UDP traffic.
src_port_mask
dst_port_mask
Specifies that the rule applies to the IP protocol ID traffic.
Specifies the ICMP packet type.
Specifies the ICMP code.
Specifies the IGMP packet type
Specifies the TCP source port mask.
Specifies the TCP destination port mask.
Specifies the TCP flag field mask.
Specifies the TCP source port mask.
Specifies the TCP destination port mask.
413