Config Ssh User - D-Link DGS-3200 SERIES Cli Manual

D G S - 3 2 0 0 - 1 0 : 4 # s h o w s s h a u t h m o d e
C o m m a n d : s h o w s s h a u t h m o d e
T h e S S H A u t h m o d e
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
P a s s w o r d : E n a b l e d
P u b l i c k e y : E n a b l e d
H o s t b a s e d : E n a b l e d
D G S - 3 2 0 0 - 1 0 : 4 #

38-5 config ssh user

Purpose
Used to update user information for ssh configuration.
Format
config ssh user <username> authmode [publickey |
password | hostbased [hostname <domain_name 32> |
hostname_ip <domain_name 32> <ipaddr>] ]
Description
The config ssh user command update the ssh user information
Parameters
Parameters
username
publickey
password
hostbased
hostname
hostname_ip
domain_name
ipaddr
Restrictions
You must have administrator privilege.
Note: The user account must be created.
DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
Description
The user name.
Specifies user authentication method.
Specifies user authentication method.
Specifies user authentication method.
Specifies host domain name.
Specifies host domain name and IP address.
Specifies host name if configuration is in host-based mode.
Specifies host IP address if configuring host-based mode.
327