Show Fdb - D-Link DGS-3200 SERIES Cli Manual

Description
The show multicast_fdb command displays the contents of the switch's multicast forwarding database.
Parameters
Parameters
vlan_name 32
macaddr
Restrictions
None.
Examples
To display multicast MAC address table:
D G S - 3 2 0 0 - 1 0 : 4 # s h o w m u l t i c a s t _ f d b
C o m m a n d : s h o w m u l t i c a s t _ f d b
V L A N N a m e
M A C A d d r e s s
E g r e s s P o r t s
M o d e
T o t a l E n t r i e s : 1
D G S - 3 2 0 0 - 1 0 : 4 #

17-9 show fdb

Purpose
Used to display the current unicast MAC address forwarding database.
Format
show fdb { port <port> | vlan <vlan_name 32> | mac_address <macaddr> | static | aging_time }
Description
The show fdb command displays the current unicast MAC address forwarding database.
DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
Description
The name of the VLAN on which the MAC address resides. The
maximum length is 32.
Specifies a MAC address, for which FDB entries will be displayed.
If no parameter is specified, all multicast fdb entries will be displayed.
: d e f a u l t
: 0 1 - 0 0 - 5 E - 0 0 - 0 0 - 0 0
: 1 - 5 , 2 6
: S t a t i c
162