Show Ipv6 Nd - D-Link DGS-3200 SERIES Cli Manual

on_link_flag
autonomous_flag
Restrictions
You must have administrator privileges. \
Examples
DGS-3200-10:4#config ipv6 nd ra prefix_option ipif ip FEC0::1/64 preferred_life_time 100
valid_life_
time 1000
Command: config ipv6 nd ra prefix_option ipif ip FEC0::1/64 preferred_life_time 100
valid_life_time
1000
Success.
DGS-3200-10:4#

45-8 show ipv6 nd

Purpose
To display an interface's information.
Format
show ipv6 nd {ipif <ipif_name 12>}
Description
To display IPv6 ND related configuration.
Parameters
Parameters
ipif_name
Restrictions
None.
DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
When set to 1, the address implied by the specified
prefix are available on the link where the RA message
is received.
When set to 1, then the specified prefix will be used to
create an autonomous address configuration.
Description
The interface name.
406