D-Link DGS-3200 SERIES Cli Manual page 64

[by_password auth [md5 <auth_password 8-16 > | sha <auth_password 8-20 >]
priv [none | des <priv_password 8-16> ]|
by_key auth [md5 <auth_key 32-32>| sha <auth_key 40-40>]
priv [none | des <priv_key 32-32> ]]}
Description
The create snmp user command creates a new user to an SNMP group originated by this
command. User can chose input authencation and privacy by password or by key.
Parameters
Parameters
SNMP_name
groupname
encrypted
by_password
by_key
auth
auth_password
priv_password
auth_key
priv_key
Restrictions
You must have administrator privileges.
Example
DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
Description
The name of the user on the host that connects to the agent.
The range is 1 to 32 .
The name of the group to which the user is associated.
The range is 1 to 32 .
Specifies whether the password appears in encrypted format.
indicate input password for authentication and privacy
indicate input key for authentication and privacy
Initiates an authentication level setting session.
The options are md5 and sha .
The HMAC-MD5-96 authentication level.
md5
The HMAC-SHA-96 authentication level.
sha
A authentication string used by MD5 or SHA1.
A privacy string used by DES.
A authentication key used by MD5 or SHA1, it is hex string type.
A privacy key used by DES, it is hex string type.
64