Delete Stp Instance_Id - D-Link DGS-3200 SERIES Cli Manual

Description
To create a new MST instance independent from the default Instance: CIST （Instance 0). After creating the
MST instance, you need to configure the VLANs（using commands in 47-7), or the newly created MST
instance will still be in a disabled state .
Parameters
Parameters
instance_id
Restrictions
You must have administrator privilege.
Examples
To create an MSTP instance:
D G S - 3 2 0 0 - 1 0 : 4 # c r e a t e s t p i n s t a n c e _ i d 2
C o m m a n d : c r e a t e s t p i n s t a n c e _ i d 2
W a r n i n g : T h e r e i s n o V L A N m a p p i n g t o t h i s i n s t a n c e _ i d !
S u c c e s s .
D G S - 3 2 0 0 - 1 0 : 4 #

16-6 delete stp instance_id

Purpose
Used to delete an MST instance.
Format
delete stp instance_id <value 1-15>
Description
To delete the specified MST Instance . CIST（Instance 0）cannot be deleted and you can only delete one
instance at a time.
Parameters
Parameters
instance_id
DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
Description
MSTP instance ID. Instance 0 represents a default instance, CIST.
The DUT supports 16 Instance (0-15) at most.
Description
MSTP instance ID. Instance 0 represents the default instance, CIST.
The DUT supports 16 instances (0-15) at most.
146