D-Link DGS-3200 SERIES Cli Manual page 51

Format
upload log_toTFTP [ <ipaddr> | <ipv6addr> ] <path_filename 64>
upload cfg_toTFTP [ <ipaddr> | <ipv6addr> ] <path_filename 64> { <config_id 1-2>}
Description
This command is used to upload either the switch's configuration or the switch's history log to a TFTP
server.
Parameters
Parameters
log_toTFTP
cfg_toTFTP
ipaddr
ipv6addr
path_filename
config_id <1-2>
Restrictions
You must have administrator privileges.
Examples
Upload configuration to TFTP server:
D G S - 3 2 0 0 - 1 0 : 4 # u p l o a d c f g _ t o T F T P 1 0 . 4 8 . 7 4 . 1 2 1 c : \ c f g \ D G S - 3 2 0 0 - 1 0 \ c f g c o n f i g _ i d 1
C o m m a n d : u p l o a d c f g _ t o T F T P 1 0 . 4 8 . 7 4 . 1 2 1 c : \ c f g \ D G S - 3 2 0 0 - 1 0 \ c f g c o n f i g _ i d 1
C o n n e c t i n g t o s e r v e r . . . D o n e .
U p l o a d c o n f i g u r a t i o n . . . D o n e .
D G S - 3 2 0 0 - 1 0 : 4 #
Upload system log to TFTP server:
DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
Description
Specifies that the switch history log will be uploaded to the TFTP
server.
Specifies that the switch configuration will be uploaded to the TFTP
server.
The IP address of the TFTP server.
The IPv6 address of the TFTP server.
Specifies the location of the switch configuration file on the TFTP
server. This file will be replaced by the uploaded file from the switch.
The maximum length is 64.
Specifies the configuration identify number of the indicated
configuration.
51