Config 802.1X Capability; Config 802.1X Auth_Parameter - D-Link DGS-3200 SERIES Cli Manual

35-8 config 802.1x capability

Purpose
Used to configure the port capability.
Format
config 802.1x capability ports [<portlist>|all] [authenticator|none]
Description
The config 802.1x capability command configures the port capability.
Parameters
Parameters
portlist
all
authenticator
none
Restrictions
You must have administrator privileges.
Examples
To configure the port capability:
D G S - 3 2 0 0 - 1 0 : 4 # c o n f i g 8 0 2 . 1 x c a p a b i l i t y p o r t s 1 - 1 0 a u t h e n t i c a t o r
C o m m a n d : c o n f i g 8 0 2 . 1 x c a p a b i l i t y p o r t s 1 - 1 0 a u t h e n t i c a t o r
S u c c e s s .
D G S - 3 2 0 0 - 1 0 : 4 #

35-9 config 802.1x auth_parameter

Purpose
Used to configure the parameters that control the operation of the authenticator associated with a port.
Format
config 802.1x auth_parameter ports [<portlist>|all] [default|{direction [both|in]|port_control
[force_unauth|auto|force_auth]|quiet_period <sec 0-65535>|tx_period <sec 1-65535>|supp_timeout
<sec 1-65535>|server_timeout <sec 1-65535>|max_req <value 1-10>|reauth_period <sec
1-65535>|enable_reauth [enable|disable]}]
DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
Description
Specifies a range of ports to be configured.
All ports.
The port that wishes to enforce authentication before allowing access
to services that are accessible via that Port adopts the authenticator
role.
Allows the flow of PDUs via the Port.
272