Enable Ipif_Ipv6_Link_Local_Auto; Disable Ipif_Ipv6_Link_Local_Auto - D-Link DGS-1210/ME Series Reference Manual

To configure the retrans_time of IPv6 ND neighbor solicitation to be 100:
DGS-1210-28MP/ME:5# config ipv6 nd ns ipif System retrans_time 100
Command: config ipv6 nd ns ipif System retrans_time 100
Success.
DGS-1210-28MP/ME:5#

enable ipif_ipv6_link_local_auto

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable the IP interface IPv6 link-local settings on the switch:
DGS-1210-28MP/ME:5# enable ipif_ipv6_link_local_auto System
Command: enable ipif_ipv6_link_local_auto System
Success.
DGS-1210-28MP/ME:5#

disable ipif_ipv6_link_local_auto

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable the IP interface IPv6 link-local settings on the switch:
DGS-1210/ME Metro Ethernet Switch CLI Reference Guide
Used to enable the autoconfiguration of the link local address when
no IPv6 address is configured.
enable ipif_ipv6_link_local_auto <ipif_name 12>
This enable ipif_ipv6_link_local_auto command will automatically
create an IPv6 link local address for the Switch if no IPv6 address
has previously been configured.
<ipif_name 12> - Specifies the name.
Only Administrator or operator-level users can issue this command.
Used to disable the autoconfiguration of the IPv6 link local address.
disable ipif_ipv6_link_local_auto <ipif_name 12>
This disable ipif_ipv6_link_local_auto command will disable the
automatic creation of an IPv6 link local address for the Switch. Once
this command is entered, any previous IPv6 link local address that
has been created for the IP interface selected will be deleted from
the switch.
<ipif_name 12> - Specifies the name.
Only Administrator or operator-level users can issue this command.
417