D-Link DGS-3200 SERIES Cli Manual page 300

be sent to the first server host in the TACACS+ built-in server group. If the first server host in the TACACS+
group is missing, the authentication request will be sent to the second server host in the TACACS+ group,
and so on. If all server hosts in the TACACS+ group are missing, the authentication request will be sent to
the first server host in the TACACS group. If all server hosts in the TACACS group are missing, the local
enable password in the device is used to authenticate this user's password. The local enable password in
the device can be configured by the CLI command "config admin local_password".
Parameters
Parameters
default
method_list_name
<string 15>
tacacs
xtacacs
tacacs+
radius
server_group <string
15>
local_enable
none
Restrictions
You must have administrator privilege.
Examples
To configure a user-defined method list for promoting a user's privilege to Admin level:
D G S - 3 2 0 0 - 1 0 : 4 # c o n f i g a u t h e n _ e n a b l e m e t h o d _ l i s t _ n a m e e n a b l e _ l i s t _ 1 m e t h o d t a c a c s +
t a c
a c s l o c a l _ e n a b l e
C o m m a n d : c o n f i g a u t h e n _ e n a b l e m e t h o d _ l i s t _ n a m e e n a b l e _ l i s t _ 1 m e t h o d t a c a c s + t a c a c
s l o c a l _ e n a b l e
S u c c e s s .
D G S - 3 2 0 0 - 1 0 : 4 #
DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
Description
The default method list of authentication methods.
The user-defined method list of authentication methods.
Authentication by the built-in server group "tacacs".
Authentication by the built-in server group "xtacacs".
Authentication by the built-in server group "tacacs+".
Authentication by the built-in server group "radius".
Authentication by the user-defined server group.
Authentication by local enable password in device.
No authentication.
300