Piston Retainer - Dodge Dakota Sport 2001 Service Manual

AN
OVERRUNNING CLUTCH CAM/OVERDRIVE PISTON RETAINER (Continued)
(4) Insert Adapter
retainer (Fig. 198).
(5) Assemble Puller Bolt SP-3701 and Press Plate
SP-3583-A (Fig. 199).
Fig. 197 Positioning Replacement Clutch Cam In
1 - ALIGN SERRATIONS ON CAM AND IN CASE
2 - CLUTCH CAM
Fig. 198 Positioning Adapter Tool In Overdrive

Piston Retainer

1 - PISTON RETAINER
2 - SPECIAL TOOL SP-5124
(6) Install assembled puller plate and bolt (Fig.
200). Insert bolt through cam, case and adapter tool.
Be sure plate is seated squarely on cam.
(7) Hold puller plate and bolt in place and install
puller nut SP-3701 on puller bolt (Fig. 201).
(8) Tighten puller nut to press clutch cam into
case (Fig. 201). Be sure cam is pressed into case
evenly and does not become cocked.
(9) Remove clutch cam installer tools.
Tool SP-5124 into
Case
AUTOMATIC TRANSMISSION - 46RE
piston
Fig. 199 Assembling Clutch Cam Puller Bolt And
1 - PULLER BOLT SP-3701
2 - PRESS PLATE SP-3583-A
(10) Stake case in 14 places around clutch cam to
help secure cam in case. Use blunt punch or chisel to
stake case.
(11) Remove piston retainer from case. Cover
retainer with plastic sheeting, or paper to keep it
dust free.
(12) Clean case and cam thoroughly. Be sure any
chips/shavings generated during cam installation are
removed from case.
Fig. 200 Positioning Puller Plate On Clutch Cam
1 - SPECIAL TOOL SP-3701
2 - BE SURE PLATE SP-3583-A IS SEATED SQUARELY ON CAM
Press Plate
21 - 367