25 - 34
EVAPORATIVE EMISSIONS
VAPOR CANISTER (Continued)
REMOVAL
The EVAP canister is located below the vehicle,
inside the left frame rail, in front of the fuel tank
(Fig. 25).
Fig. 25 EVAP Canister Location
1 - LEFT FRAME RAIL
2 - RUBBER GROMMETS (2)
3 - LOCATING PINS (2)
4 - EVAP CANISTER
5 - MOUNTING NUT
6 - MOUNTING BRACKET
(1) Raise vehicle.
(2) Disconnect vacuum lines at EVAP canister.
Note location of lines before removal.
(3) Remove canister mounting nut.
(4) Remove canister from mounting bracket.
INSTALLATION
The EVAP canister is located below the vehicle,
inside the left frame rail, in front of the fuel tank
(Fig. 25).
(1) Position canister locating pins into mounting
bracket grommets (Fig. 25) and install mounting nut.
(2) Tighten mounting nut to 17–24 N·m (150–210
in. lbs.) torque.
(3) Connect vacuum lines at canister.
(4) Lower vehicle.
AN