Dodge Dakota Sport 2001 Service Manual page 1482

AN
MANUAL - NV3500 (Continued)
(3) Remove transmission jack and engine support
fixture.
(4) Install transfer case on transmission jack.
Secure transfer case to jack with safety chains.
(5) Raise jack and align transfer case input gear
with transmission output shaft.
(6) Move transfer case forward and seat it on
transmission.
(7) Install and tighten transfer case attaching
nuts. Tighten nuts to 41-47 N·m (30-35 ft. lbs.) if
case has 3/8 studs, or 30-41 N·m (22-30 ft. lbs.) if
case has 5/16 studs.
(8) Connect backup light switch wires.
(9) Install transmission dust cover.
(10) Install starter.
(11) Install transfer case shift lever to side of
transfer case.
SPECIFICATIONS
SPECIFICATIONS - NV3500
DESCRIPTION
Clutch Housing Bolts
Crossmember Bolts
Crossmember Insulator
Nuts
Drain/Fill Plug
Front to Rear Housing
Bolts
Front Bearing Bolts
Idler Shaft Bolts
Rear Bearing Bolts
Shift Tower Bolts
Slave Cylinder Nuts
Transfer Case Nuts
(12) Connect transfer case shift lever to range
lever on transfer case.
(13) Align and connect propeller shafts.
(14) Fill transmission with required lubricant.
Check lubricant level in transfer case and add lubri-
cant if necessary.
(15) Install transfer case skid plate, if equipped,
and crossmember. Tighten attaching bolts/nuts to 41
N·m (30 ft. lbs.).
(16) Install exhaust system components.
(17) Lower vehicle.
(18) Install shift tower and lever assembly. Tighten
shift tower bolts to 7-10 N·m (5-7 ft. lbs.).
(19) Install shift lever boot.
(20) Install floor console. Refer to 23 Body for pro-
cedures.
(21) Connect battery negative cable.
TORQUE SPECIFICATIONS
N·m
54-61
61-75
54-61
9-27
30-35
7-10
19-25
30-35
7-10
23
47
MANUAL - NV3500
Ft. Lbs.
40-45
45-55
40-45
14-20
22-26
5-7
14-18
22-26
5-7
17
35
21 - 73
In. Lbs.
-
-
-
-
-
62-88
-
-
-
203
-