23 - 140
WEATHERSTRIP/SEALS
QUARTER VENT GLASS
WEATHERSTRIP
REMOVAL
(1) Remove the quarter window. If necessary, refer
to the removal procedure.
(2) Pull the seal away from the flange around the
perimeter of the window opening (Fig. 6).
(3) Clean the flange as necessary.
Fig. 6 Quarter Vent Weatherstrip
1 - QUARTER GLASS SEAL
INSTALLATION
(1) Center and butt the seal ends together at the
bottom, centerline of the opening.
(2) Mate the seal with the bottom flange.
(3) Mate the seal with the front, vertical flange.
(4) Move upward and mate the seal with the top
flange.
(5) Mate the seal with the rear, vertical flange.
(6) Install the quarter window.
REAR DOOR GLASS RUN
WEATHERSTRIP
REMOVAL
(1) Remove trim panel.
(2) Remove inner beltline weatherstrip.
(3) Remove outer beltline weatherstrip.
(4) Pull weatherstrip from door frame and divider
bar channel (Fig. 7).
INSTALLATION
(1) Position weatherstrip in door frame and divider
bar channel.
(2) Install outer beltline weatherstrip.
(3) Install inner beltline weatherstrip.
Fig. 7 Glass Run Weatherstrip
1 - REAR DOOR
2 - GLASS RUN WEATHERSTRIP
(4) Install trim panel.
REAR DOOR INNER BELT
WEATHERSTRIP
REMOVAL
(1) Remove trim panel.
(2) Pull weatherstrip from inner door panel (Fig.
8).
Fig. 8 Inner/Outer Belt Weatherstrip
1 - OUTER BELT WEATHERSTRIP
2 - INNER BELT WEATHERSTRIP
INSTALLATION
(1) Position weatherstrip on inner door panel (Fig.
8).
(2) Press into place.
(3) Install trim panel.
AN