Dodge Dakota Sport 2001 Service Manual page 1449

21 - 40 MANUAL - NV3500
MANUAL - NV3500 (Continued)
Fig. 14 INPUT SHAFT AND COUNTERSHAFT
BEARING RACE
1 - INPUT SHAFT BEARING
2 - FRONT HOUSING
3 - COUNTERSHAFT FRONT BEARING
Fig. 15 REVERSE BLOCKER
1 - REVERSE BLOCKER
2 - SHIFTER SHAFT BUSHING
3 - VENT
SHIFT/FORK SHAFTS AND REVERSE IDLER
SEGMENT
(1) Unseat the roll pin that secures the shift
socket to the shift shaft with Remover 6858 as fol-
lows:
(a) Position remover on the shift shaft. Center
the tool over the roll pin and verify that the tool
legs are firmly seated on the shift socket (Fig. 17).
(b) Tilt the socket toward the side of the case.
This positions the roll pin at a slight angle to avoid
trapping the pin between the gear teeth.
(c) Tighten the tool to press the roll pin down-
ward and out of the shift socket (Fig. 17).
Fig. 16 GEARTRAIN AND SHIFT COMPONENT
1 - SHIFT SHAFT
2 - BUSHING
3 - REAR HOUSING
4 - REVERSE IDLER AND SUPPORT
5 - OUTPUT SHAFT AND GEARS
6 - COUNTERSHAFT
7 - 1-2 FORK
8 - INPUT SHAFT
9 - 3-4 FORK
NOTE: Press the roll pin just enough to clear the
shift shaft. Be careful not to push the pin into the
geartrain.
Fig. 17 SHIFT SOCKET ROLL PIN
1 - SPECIAL TOOL 6858
2 - SHIFT SOCKET
AN