Dodge Dakota Sport 2001 Service Manual page 1461

21 - 52 MANUAL - NV3500
MANUAL - NV3500 (Continued)
Fig. 53 REVERSE GEAR BEARING
1 - REVERSE GEAR BEARING
2 - SHOULDER
Fig. 54 REVERSE GEAR
1 - REVERSE GEAR
Fig. 55 REVERSE SYNCHRO
1 - REVERSE GEAR
2 - SYNCHRO RING
CAUTION: One side of the hub has shoulders
around the hub bore, this side of the hub faces the
front of the shaft. One side of the sleeve is tapered
the tapered side faces the front of the shaft.
(5) Start fifth-reverse synchro assembly on output
shaft splines by hand. Then seat synchro onto shaft
with a press and Cup 6310-1 (Fig. 56).
(6) Install new fifth-reverse hub snap ring (Fig.
57) and verify the snap ring is seated.
Fig. 56 FIFTH-REVERSE SYNCHRO ASSEMBLY
1 - SPACER
2 - PRESS RAM
3 - REVERSE GEAR
4 - FIFTH-REVERSE SYNCHRO ASSEMBLY
5 - CUP
6 - PRESS BLOCKS
7 - OUTPUT SHAFT
NOTE: Snap rings are available in thicknesses from
2.00 mm to 2.20 mm (0.078 to 0.086 in.). Install
thickest snap ring that will fit in shaft groove.
Fig. 57 FIFTH/REVERSE SYNCHRO HUB SNAP RING
1 - FIFTH-REVERSE SYNCHRO ASSEMBLY
2 - SNAP RING
3 - PRESS BED
4 - PRESS BLOCKS
AN