Floor Console Removal; Installation; Headliner Removal - Dodge Dakota Sport 2001 Service Manual

AN
FLOOR CONSOLE
REMOVAL
(1) Open console lid and remove bolts attaching
console to floor pan (Fig. 12).
(2) Lift the cup holder bin mat and remove bolt
attaching the console to the floor pan.
(3) Lift the cup holder mat and remove the bolts
attaching the console to the floor pan.
(4) Lift the rear of the console and pull the console
rearward to separate from the shift bezel.
(5) Remove the console from the vehicle.
Fig. 12 Floor Console
1 - SHIFT BEZEL
2 - CUP HOLDER MAT
3 - ACCESSORY BIN MAT
4 - FLOOR CONSOLE
5 - BRACKET

INSTALLATION

(1) Position the console in the vehicle.
(2) While holding the console with the front of the
console pointing downward, position the front of the
console on top of the shift bezel.
(3) Align rear of console with the mounting
bracket.
(4) Install bolts attaching console to floor pan.
HEADLINER
REMOVAL
(1) Remove sun visors and visor hooks.
(2) Remove coat hooks.
(3) Remove overhead console, if equipped. Refer to
Group 8V, Overhead Console for removal procedure.
(4) Remove A-pillar trim.
(5) Remove quarter trim/B-pillar trim panels.
(6) Remove dome lamp. (Refer to 8 - ELECTRI-
CAL/LAMPS/LIGHTING - INTERIOR/DOME LAMP
- REMOVAL).
(7) Separate headliner from roof panel (Fig. 13)
and (Fig. 14).
(8) Extract headliner through door opening.
Fig. 13 Quad Cab Headliner
1 - HEADLINER
2 - PUSH IN FASTENER
INSTALLATION
(1) Position headliner in vehicle.
(2) Install quarter/B-pillar trim panels.
(3) Install A-pillar trim.
(4) Install overhead console, if equipped.
(5) Install dome lamp. (Refer to 8 - ELECTRICAL/
LAMPS/LIGHTING - INTERIOR/DOME LAMP -
INSTALLATION).
(6) Install coat hooks.
(7) Install sun visors and visor hooks.
INTERIOR 23 - 115