AN
AUTOMATIC TRANSMISSION - 42RE (Continued)
Fig. 21 Removing Front Band Strut
1 - BAND LEVER
2 - BAND STRUT
3 - FRONT BAND
Fig. 22 Removing Front Band Lever
1 - FRONT BAND LEVER
(22) Remove front and rear clutch units as assem-
bly. Grasp input shaft, hold clutch units together and
remove them from case (Fig. 23).
(23) Lift front clutch off rear clutch (Fig. 24). Set
clutch units aside for overhaul.
(24) Remove intermediate shaft thrust washer
from front end of shaft or from rear clutch hub (Fig.
25).
(25) Remove output shaft thrust plate from inter-
mediate shaft hub (Fig. 26).
AUTOMATIC TRANSMISSION - 42RE
Fig. 23 Removing Front/Rear Clutch Assemblies
1 - INPUT SHAFT
2 - FRONT CLUTCH
3 - REAR CLUTCH
Fig. 24 Separating Front/Rear Clutch Assemblies
1 - FRONT CLUTCH
2 - REAR CLUTCH
21 - 107