23 - 142
WEATHERSTRIP/SEALS
ROOF RAIL WEATHERSTRIP/RETAINER (Continued)
INSTALLATION
NOTE: The screws attaching the retainer to the roof
are coated with wax to prevent water leakage. If the
retainer has been removed from the roof, replace
the screws.
(1) Ensure the area where tape secures the weath-
erstrip is clean. Use Mopar Super Clean or equiva-
lent.
(2) Position retainer on vehicle.
(3) Install screws attaching retainer to roof rail.
(4) Starting at the forward end of retainer, push
weatherstrip on until seated.
(5) Peel the backing from the rearward end of the
weatherstrip and press to secure.
AN