AN
FRONT END SPLASH SHIELDS (Continued)
1 - FENDER SPLASH SHIELD
2 - INNER FENDER
3 - INNER FENDER
4 - WHEELHOUSE LINER
5 - FENDER SPLASH SHIELD
6 - PLASTIC RIVET
FUEL FILL DOOR
REMOVAL
(1) Open the fuel filler door.
(2) Remove the screws attaching the door to the
cargo box outer panel (Fig. 6).
(3) Remove the door from the panel.
INSTALLATION
(1) Position the fuel filler door on the cargo box
outer panel with the screw holes aligned.
(2) Install the screws attaching the fuel filler door
to the cargo box outer panel.
GRILLE
REMOVAL
(1) Release primary hood latch.
(2) Release hood safety catch and open hood.
(3) Remove screws attaching bottom of grille to
grille mounting bracket.
Fig. 5 Front Wheelhouse Liner
7 - PLASTIC RIVET
8 - WHEELHOUSE LINER
9 - INNER FENDER
10 - WHEELHOUSE LINER
11 - PLASTIC RIVET
1 - FUEL DOOR
2 - BUMPER
(4) Remove nuts attaching grille to hood (Fig. 7).
(5) Separate grille from vehicle.
EXTERIOR
Fig. 6 Fuel Filler Door
23 - 81