AN
MANUAL - NV1500 (Continued)
(9) Remove input shaft bearing retainer bolts (Fig.
6).
Fig. 6 INPUT SHAFT BEARING RETAINER BOLTS
1 - BOLTS (5)
2 - BEARING RETAINER
(10) Remove bearing retainer from input shaft
with a pry tool (Fig. 7).
Fig. 7 INPUT SHAFT BEARING RETAINER
1 - BEARING RETAINER
2 - OIL FEED
(11) Remove snap ring securing input shaft in
front bearing (Fig. 8).
Fig. 8 INPUT SHAFT SNAP RING
1 - INPUT SHAFT SNAP RING
2 - OIL FEED
(12) Remove front housing bolts (Fig. 9). Leave one
bolt in place until geartrain is ready to be removed
from case. Three bolts at the rear of housing are for
the output shaft bearing retainer.
Fig. 9 HOUSING AND BEARING RETAINER BOL
1 - RETAINER BOLTS
2 - HOUSING BOLTS
3 - RETAINER BOLT
4 - HOUSING BOLT LOCATIONS
MANUAL - NV1500
21 - 5