Standard Procedure - Dodge Dakota Sport 2001 Service Manual

AN
FLUID (Continued)
Installer, Seal - 7884
Installer, Pump Housing Seal - 7888
Installer, Bearing - 8033-A
Remover, Bushing - 8158
Installer, Bushing - 8157
TRANSFER CASE - NV244
FLUID
STANDARD PROCEDURE - FLUID DRAIN AND
REFILL
The fill and drain plugs are both in the rear case
(Fig. 82).
Fig. 82 Fill/Drain Plug and I.D. Tag Location -
1 - I.D. TAG
2 - FILL PLUG
3 - DRAIN PLUG
(1) Raise vehicle.
(2) Position drain pan under transfer case.
(3) Remove drain and fill plugs and drain lubri-
cant completely.
(4) Install drain plug. Tighten plug to 41-54 N·m
(30-40 ft. lbs.).
(5) Remove drain pan.
(6) Fill transfer case to bottom edge of fill plug
opening with Mopar® ATF +4, type 9602, Automatic
Transmission fluid.
(7) Install and tighten fill plug to 41-54 N·m
(30-40 ft. lbs.).
(8) Lower vehicle.
21 - 595
Typical