Table of Contents
Advertisement
Symptoms
Symptom
ADF malfunction/ADF will not feed
Card reader will not read
Dog ears
Double feeds
Hang up
Technical Support Center:
Turn off the printer by unplugging the power cord. Wait for 10 seconds, and turn on
the printer. Insert paper in the ADF input tray properly. Resend the scan/copy job. If
the problem remains, then replace the printer.
Service:
Go to
"ADF malfunction/ADF will not feed service check" on page
Technical Support Center:
Check the memory card for the following:
• If it is supported by the printer.
• If it needs an adapter.
• If it is in the correct orientation when installed.
• If it is inserted properly to the card reader slot.
• If it is still working.
Turn off the printer by unplugging the power cord. Wait for 10 seconds, and turn on
the printer. Reinsert the memory card. If the problem remains, then replace the
printer.
Service:
Check the pins on the card reader for any damage. If damaged, then replace the
card reader board. See
"Card reader removal" on page
remains, then replace the system board. See
page
4-32.
Technical Support Center:
Check if the media on the tray is placed properly. Check for curls and folds in the
media. Replace the media if necessary. Check if the media inserted matches the
paper type and paper size settings in the printer. If the problem remains, then
replace the printer.
Service:
Check the wall rib housing, pick tires, and paper tray for any wear and damage.
Check the paper path for any obstruction.
Technical Support Center:
Check if the media on the tray is placed properly. Check for curls and folds in the
media. Replace the media if necessary. Check if the media inserted matches the
paper type and paper size settings in the printer. If the problem remains, then
replace the printer.
Service:
Go to
"Double feed service check" on page
Technical Support Center:
Turn off the printer for 10 seconds by unplugging the power cord. Remove the
network and fax connections, and any attached memory cards. Turn on the printer.
If the problem remains, then replace the printer.
Service:
Go to
"Hang up service check" on page
Action
4-40. If the problem
"System board removal" on
2-73.
2-75.
Diagnostic information
Marketing Name
Previous
Next
Go Back
2-66.
2-54
Advertisement
Table of Contents
