Attendance messages
User prompts
Error
Alignment problem
Cannot Collate Job
Card Access Error
Change [Paper source] to
[Custom String]
Change [Paper source] to
[Custom Type Name]
Change [Paper source] to
[Size] Paper
Change [Paper source] to
[Size] [Type] Paper
Action
Try one or more of the following:
• Load only plain, unmarked paper when aligning the cartridges.
The printer will read any markings on used paper, which could
cause the alignment error message to appear.
• Touch Cancel to clear the message.
Try one or more of the following:
• Touch Continue to print the pages that were saved in the printer
memory, and then collate the remainder of the print job.
• Touch Cancel Printing to cancel the current print job.
Try one or more of the following:
• Remove the memory device, and then reinsert it into the card slot or
USB port.
• Touch OK to clear the message.
Try one or more of the following:
• Select the paper tray with the correct paper size or type.
• Touch Paper Loaded, Continue to continue printing after loading
the correct paper size and paper type in the default paper tray.
• Press
to cancel the current job.
Try one or more of the following:
• Select the paper tray with the correct paper size or type.
• Touch Paper Loaded, Continue to continue printing after loading
the correct paper size and paper type in the default paper tray.
• Press
to cancel the current job.
Try one or more of the following:
• Select the paper tray with the correct paper size or type.
• Touch Paper Loaded, Continue to continue printing after loading
the correct paper size and paper type in the default paper tray.
• Press
to cancel the current job.
Try one or more of the following:
• Select the paper tray with the correct paper size or type.
• Touch Paper Loaded, Continue to continue printing after loading
the correct paper size and paper type in the default paper tray.
• Press
to cancel the current job.
Marketing Name
2-46
Diagnostic information
Previous
Next
Go Back