Wall Rib Housing Removal - Lexmark Pro5500t Service Manual

Wall rib housing removal

1.
Remove the input tray. See
2.
Remove the duplex unit. See
3.
Place the printer at the edge of the table.
4.
Remove the two screws (A) at the bottom of the printer.
Warning: Be sure not to mar the surface of the printer.
"Input tray removal" on page
"Duplex unit removal" on page
A
4-8.
4-11.
Repair information
4447-20x
Previous
Next
Go Back
Disassembly
Flow chart
4-12