Note
❒ To get the above addresses, contact your administrator.
❒ Use the default configuration if you cannot obtain setting addresses.
❒ The IP address, subnet mask and broadcast address are the same as that for
the ethernet interface and IEEE 802.11b interface.
❒ TCP/IP configuration is the same for both Ethernet and IEEE 802.11 interface.
If interfaces are changed, the new interface inherits the configuration.
❒ Use "0x" as the initial two letters of a hexadecimal address.
info
Use the "info" command to display printer information such as paper tray, out-
put tray, and printer language.
❖ Printer information display
msh> info
Reference
p.254 "Getting Printer Information over the Network".
Remote Maintenance by telnet
6
229