Sending A Fax By Immediate Transmission Mode - Ricoh GELSPRINTER GX 3000SF User Manual

Sending a Fax by Immediate Transmission Mode

You can use immediate transmission mode to send normal faxes.
This function is not available for Internet Fax.
You can only specify one destination per transmission. If you specify multiple destinations, then trans-
mission mode will automatically change to memory transmission.
1 Press the [Memory Trans.] key.
Make sure the [Memory Trans.] indicator is unlit.
2 Place the original in the ADF.
1 6 : 0 0
- S e t O r i g - F a x O n l y
To change the scan settings, press the [Resolution] key, and then specify the settings.
3 Specify a destination.
S U B =
If you press a Quick Dial key, the destination assigned to it appears on the display and transmission
begins automatically. You do not have to press the [B&W Start] key as in step 4. (below).
If you make a mistake, press the [Clear/Stop] key, and then enter the correct number.
AQR347S
S t d 1 0 0 %
[ 1 ]
Sending a Fax by Immediate Transmission Mode
7
271