Network Status - Omron C200HW-CLK21 Operation Manual

Using the Message Service
C200HX/HG/HE PLCs
CVM1, and CV-series
PLCs
CQM1H-series PLCs

Network Status

C200HX/HG/HE PLCs
CS/CJ-series, CVM1, and
CV-series PLCs
CQM1H-series PLCs
190
Name
Network Instruction
Enabled Flag
Network Instruction
Error Flag
Name
Word
Network A502 Port number corresponds
Instruction to bit number, i.e., port 0:
Enabled Flag bit 00, port 1: bit 01, etc.
Network A502 Port number corresponds
Instruction to bit number plus 8, i.e.,
Error Flag port 0: bit 08, port 1: bit 09,
etc.
Name
Network Instruction
Enabled Flag
Network Instruction
Error Flag
The nodes on the network are shown in the following illustrations.
Operating level 0 Operating level 1
AR 08 AR 12
AR 09 AR 13
CIO 1500 + 25
CIO 1500 + 25
N: Unit number
IR 192
IR 193
Operating Address
level
1 SR 25204 0: Execution not possible (already
executing)
0 SR 25201
1: Execution possible (not executing)
1 SR 25203 0: Normal end
1: Abnormal end
0 SR 25200
Address
Bit
0: Execution not enabled (executing)
1: Execution enabled (not executing)
0: Normal end
1: Abnormal end
Address
AR 0209 0: Execution not possible (already executing)
1: Execution possible (not executing)
AR 0208 0: Normal end
1: Abnormal end
The numbers in the squares indicate node addresses.
The corresponding node participation status is as follows:
0: Not part of network
1: Part of network
N + 2
N + 3
The numbers in the squares indicate node addresses.
The corresponding node participation status is as follows:
0: Not part of the network
1: Part of the network
The numbers in the squares indicate node addresses.
The corresponding node participation status is as follows:
0: Not part of network
1: Part of network
Section 6-3
Contents
Contents
Contents